Impecca IPAC10-LR User's Guide download pdf (Page 5)

ENGLISHESPAÑOLFRANÇAIS

CAUTION

ELECTRICAL INFORMATION

• Be sure your electrical wiring is adequate for the model you have chosen. This information can be found on

the rating label, a silver-colored sticker generally located on the upper-right side of the cabinet.

• Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is

important. The power cord is equipped with a three-prong

grounding plug for protection against shock hazards.

• Your air conditioner must be connected to a properly

grounded wall receptacle. If the wall receptacle you intend

to use is not adequately grounded or protected by a time de-

lay fuse or circuit breaker, have a qualified electrician install the proper recepta-

cle.

• Ensure the receptacle is accessible aer the unit installation. The power supply

cord contains a current device that senses damage to the power cord and ex-

cess current draw from the unit. To test your current device do the following:

1. Plug in the Air Conditioner.

2. Press the TEST button. You will hear a click as the RESET button pops out within

the rubber housing and the LED will turn o.

3. Press the RESET button. You will hear a click as the button engages and the LED

will illuminate.

4. The power supply cord is now supplying electricity to the unit.

Note: Your model may have the TEST and RESET buttons on the side or the front

of the plug head.

NOTES:

• Do not use the TEST and RESET buttons to turn the unit on or o.

• If the current device fails the test or the power cord becomes damaged, the entire power cord must be re-

placed with an equivalent power cord and current device by a licensed electrician.

 Stop operation and remove window filler

panels from window during severe storm or

hurricane.

 Hold the plug by the head of the power

plug when unplugging unit.

 Unplug the power cord when not using

the unit for extended periods of time.

• Operation during a severe storm may allow

a significant amount of water to enter the

indoors.

• Pulling from the wire can cause wire to fray

leading to electric shock or fire.

• Will prevent damage to the unit.

 Do not place obstacles around air-intake

vents or inside cool air outlet.

 Do not place heavy objects on the

power cord and ensure that the cord

is not pinched or stressed.

 Always insert the filters securely.

Clean filter at least once per month.

• It may cause failure of appliance. • There is danger of fire or electric shock.

• Operation with dirty filters (or without

filters) will eect performance and may

cause damage to the unit.

 Do not use strong detergent such as

wax or paint thinner to clean the unit.

Use a damp, so cloth.

• Appearance may deteriorate due to change

of product color or scratching of its surface.

CAUTION

NOTE: The power supply cord with this air conditioner

contains a current detection device designed to reduce the risk

of fire. In the event that the power supply cord is damaged, it

cannot be repaired -- it must be replaced with a cord from the

Product Manufacturer.

Side button

version

1 2 3 4 5 6 7 8 9 10 ... 23 24

Comments to this Manuals

No comments

Impecca IPAC10-LR User's Guide Page 5

Comments to this Manuals

Related products and manuals for Mobile air conditioners Impecca IPAC10-LR