Impecca IPAC10-LR User's Guide download pdf (Page 16)

ENGLISH ESPAÑOL FRANÇAIS

AUTO OFF INSTRUCTIONS:

1. Press the TIMER OFF button on the remote con-

troller (or, press the TIMER button on the unit’s

control panel until the TIMER OFF LED is illuminat-

ed). The remote controller shows TIMER OFF, the

last Auto-o setting time and the signal “h” will be

shown on the LCD display area. Now it is ready to

reset the Auto-o time to START the operation.

2. Push the TIMER OFF button again to set desired

Auto-o time. Each time you press the button, the

time increases in 30 minutes increments, up to 10

hours, then at 1 hour increments up to 24 hours.

3. Aer setting the TIMER OFF, there will be a one-

half second delay before the remote controller

transmits the signal to the air conditioner. Then,

aer approximately another 2 seconds, the signal

“h” will disappear and the set temperature will

re-appear on the LCD window.

EXAMPLES OF TIMERS:

AUTO ON: If you’d like your home or oice to be

cool aer returning from an event or running er-

rands, schedule the machine to turn on and cool the

room for your arrival.

To set the machine to start in 6 hours, push the

TIMER ON button. The display will read “h”; push

the TIMER ON button until the display reads “6.0”.

Wait 3 seconds and the program will be activated

once the LED resumes displaying the room tempera-

ture.

AUTO OFF: Your children rarely turn the air condi-

tioning o during the day and you leave for work

before they leave for school. Consider scheduling

the unit to turn o automatically.

To set the machine to turn o in 1 hour, push the

TIMER OFF button. The display will read “h”; push

the TIMER OFF button until the display reads “1.0”.

Wait 3 seconds and the program will be activated

once the LED resumes displaying the room tempera-

ture.

COMBINED TIMERS: You can use the Auto On and

Auto O functions simultaneously. An example of

this feature is to turn o the unit in 1 hour when the

kids leave for school and turn it on in 6 hours just

before you return from work.

(See above.)

SLEEP (ECONOMY) OPERATION

• Press this button, the selected temperature will in-

crease by 2°F /1°C aer 30 minutes. The tempera-

ture will then increase by another 2°F /1°C aer an

additional 30 minutes.

• The new temperature will be maintained for seven

hours before it returns to the originally selected

temperature, at which point Sleep mode ends

and the unit will continue to operate as originally

programmed.

• NOTE: This feature is unavailable under FAN or

DRY modes.

PMTS (FOLLOW ME) FEATURE:

• NOTE: This feature can be activated from the

remote controller ONLY. The remote controller acts

as a remote thermostat allowing for the precise

temperature control at its location.

• To activate the Follow Me/Temp Sensing feature,

point the remote controller towards the unit and

press the PMTS/Follow Me button. The remote

displays the actual temperature at its location.

The remote controller will send this signal to the

air conditioner every three minutes interval until

press the Follow Me/Temp Sensing button again.

• If the unit does not receive the PMTS signal during

any seven-minute interval, the unit will beep to

indicate the PMTS mode has ended.

SWING FUNCTION:

Use the SWING button to adjust the Up/Down air-

flow direction .

1. Pressing this button initiates the auto-swing func-

tion.

2. Pressing the button a second time turns o the au-

to-swing function, and the airflow will remain fixed.

NOTE: If the unit senses that the blade positioning ad-

versely aects room temperature settings, the airblade

direction may be adjusted automatically.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Impecca IPAC10-LR User's Guide Page 16

Comments to this Manuals

Related products and manuals for Mobile air conditioners Impecca IPAC10-LR