Impecca IPAC10-LR User's Guide download pdf (Page 20)

ENGLISH ESPAÑOL FRANÇAIS

TROUBLESHOOTING TIPS

Problem Possible Causes Remedies

Unit does not start when

pressing on/o button

P1 appears in the display window Drain the water in the bottom tray

Room temperature is lower than the set

temperature (cool mode)

Reset the temperature

Room not cool enough

The windows or doors in the room are not

closed

Make sure all the windows and doors are

closed

There are heat sources inside the room

Remove the heat sources

if possible

Exhaust air duct is not connected or blocked

Connect the duct and make sure

it can function properly

Temperature setting is too high Decrease the set temperature

Air filter is blocked by dust Clean the air filter

Machine noisy or vibrates The ground is not level or not flat enough

Place the unit on a flat, level

surface if possible

Gurgling noises

The sound comes from the flowing of the

refrigerant inside the air conditioner unit

This noise is normal

Power shuts o in heating mode

The automatic overheat protection function

kicks in. When the temperature at the air

outlet exceeds 158°F/70°C, the device will

automatically shut o.

Switch on again aer the unit has cooled

o.

1 2 ... 15 16 17 18 19 20 21 22 23 24

No comments

Impecca IPAC10-LR User's Guide Page 20