ENGLISH
–10–
ENERGY SAVER MODE
This function is available on COOL mode. The fan will con-
tinue to run for 3 minutes aer the compressor shuts o.
The fan then cycles on for 2 minutes at 10-minute intervals
until the room temperature is above the set temperature,
at which time the compressor turns back on and Cooling
Starts. Note that due to modern energy saving regula-
tions, this mode is on by default and you must turn it o if
you want the fan to run constantly during cooling mode.
SLEEP MODE
In this mode the selected temperature will increase by 2°F
(or 2°C) 30 minutes aer the mode is selected. The tem-
perature will then increase by another 2°F (or 2°C) aer an
additional 30 minutes. This new temperature will be main-
tained for 6 hours before it returns to the originally select-
ed temperature. This ends the Sleep mode and the unit
will continue to operate as originally programmed. The
Sleep mode program can be canceled at any time during
operation by pressing the Sleep button again.
CHECK FILTER
This feature is a reminder to clean the Air Filter for more
eicient operation. The LED (light) will illuminate aer
250 hours of operation. To reset aer cleaning the filter,
press the Check Filter button and the light will go o. See
section under Cleaning and Maintenance for how to clean
the filter.
Note: Your filter may need to be cleaned much more oen
in especially dusty environments and may not need to be
cleaned as oen in especially clean environments. The 250
hour indicator is just there as a reminder.
Ion
Comments to this Manuals